1 08394053 Monitor Installation, Operation, & Maintenance Instructions 1302 WEST BEARDSLEY AVE • EL
10 DIMENSIONAL DRAWING Figure 4: Monitor Dimensional Drawing
11 WIRING Figure 5: Monitor Cable Wiring to Junction Box Terminals
ELKHART BRASS 1302 WEST BEARDSLEY AVE P.O. BOX 1127 ELKHART, IN 46514 PHONE: 574-295-8330 • 800-346-0250 FAX: 574-293-9914 WWW.ELKHA
2 TABLE OF CONTENTS PRODUCT SAFETY INFORMATION 3 MONITOR CALLOUT DRAWING 4 OVERVIEW 5 INSTALLATION INSTRUCTIONS 6 OPERATING INSTRUCTIONS 8 MAINT
3 PRODUCT SAFETY INFORMATION All personnel who may be expected to operate this equipment must be thoroughly trained in its safe and proper use.
4 MONITOR CALLOUT Figure 1: Monitor Callout Drawing Pressure Gauge Constant Torque / Constant Current
5 OVERVIEW Spit-Fire® Monitor Features: Construction: All brass with vaned 4” waterway Mounting Flange: 4” 150# flat-face ANSI flange raised f
6 INSTALLATION INSTRUCTIONS Monitor Installation 1. Attach companion flange to water supply pipe so that the bolt pattern will allow the monitor to
7 Monitor Cable Routing 1. Route cables as shown in Figure 2 below, so they will follow the vertical and horizontal movement of the monitor. Make su
8 OPERATING INSTRUCTIONS One Monitor Control This operator control panel has one set of switches and pilot lights to operate one monitor. Monitor
9 SPECIFICATIONS General Specs Input Power 120 VAC (50/60Hz.) 2 Phase as supplied by the MMCP Electrical Load 2 AMPS Per Monitor /
Comments to this Manuals